Because we want you to track the status of your repair we tag and serialise every motor that comes through our door. We then evalutate it by disassembling it to determine what faults or wear can be seen on the motor. The alignment is recorded for reassembly.
We only use top quality bearings in our motor repairs. After years of experience we have found that using top of the line bearings ensures that the motor runs for years to come. For this reason, all shaft seals, bearings + o-rings are replaced regardless of original condition.
We run all of our Indramat motors through the follwing tests: megger testing, surge testing, ohm testing, + thermo testing all to ensure your windings, wirings + housings are all functioning correctly.
Once we have reassembled the unit we torque seal the bolts which indicates that the bolts are torqued to the correct force + no unauthorised person has opened up the unit, which can often lead to failure.